Select Page

How does an expansion vessel work?

No Results Found

The page you requested could not be found. Try refining your search, or use the navigation above to locate the post.

How does an expansion vessel work? Hot Water System Management.

by | May 13, 2021 | Blog

An expansion vessel is an essential part of a pressurised hot water system. It looks like a small water tank, which is why it’s also known as an expansion tank. Inside the tank is a rubber diaphragm that separates water from the hot water system from compressed air on the other side.  

When you heat water, it expands. In a hot water system where it is essential that the pipes remain full of water at all times, this would cause a problem. With nowhere for the extra volume to expand into, the pressure relief valve would have to open to expel the excess volume in order to protect the system from the resulting high pressure levels.

The expansion vessel is an overflow tank that gives the excess volume of water somewhere safe to go. As the water heats and expands, the additional volume is channelled into the tank, expanding the diaphragm which pushes against the compressed air, allowing space for the water to be safely stored. When the water cools, the compressed air will push against the diaphragm, returning the water into the system and maintaining the pressure at the correct levels. This enables the system to keep running at maximum efficiency. 

Without an expansion vessel, your system would be at risk from burst pipes as well as damage to any appliances plumbed into the system, such as dishwashers and washing machines. 

 

Maintenance 

The part of the expansion vessel that’s most likely to cause problems is the diaphragm, which is prone to damage from hard water areas. The average lifespan of an expansion vessel is between five and ten years. There are checks you can do to make sure it’s still working, such as tapping on the tank to find out how much water and how much air is in it – the tank should be hollow halfway up. You could also feel the tank to check it’s working properly – it should be warm at the bottom and cool at the top. 

 

Expansion vessels and legionella bacteria

Expansion vessels have been identified as a potential legionella risk by the HSE. This is because of the low water flow and possible stagnation problems, combined with the increased likelihood of rust and sediment, all of which will provide legionella bacteria with a good breeding environment. It is therefore a legal requirement to take action to minimise the risks, a process that begins with a legionella risk assessment

The placement of your expansion vessel can also help minimise the risk of legionella and other microbial growth. The best position is in a cool area with cold flowing pipes and connected as close to the incoming water supply as possible. It needs to be mounted vertically in order to minimise the risk of debris becoming trapped, and it needs to have an isolation valve and drain valve to aid flushing and sampling which should be undertaken every 6 months in accordance with HSE’s guidelines.

Legionella and Water Hygiene Blog Posts

Where To Get A Legionella Assessment

Where To Get A Legionella Assessment

Legionella risk assessments are an important part of your company’s health and safety policy. Under health and safety law, it is a requirement to identify, assess and manage the risks from all dangers that may arise from work activities, which includes the legionella...

read more
Legionella Checks for Landlords

Legionella Checks for Landlords

If you are a commercial or residential landlord, then legionella checks are a necessary part of your legal health and safety responsibilities.    Why do you have to worry about legionella bacteria?  Legionella bacteria can be dangerous because they are the cause...

read more

We want to help you comply!